Question: What is joggle construction?

It defines joggle or joggling as a: Masons terms for joining two stones in such a way as to prevent them from slipping or sliding by means of a notch in one and a corresponding projection in the other. It is often seen exposed on the face of a flat arch. If the joggle is concealed, it is called a secret joggle.

What is a joggle in engineering?

joggle (plural joggles) (engineering) A step formed in material by two adjacent reverse bends. (architecture) A notch or tooth in the joining surface of any piece of building material to prevent slipping.

What is staggering in civil engineering?

The staggered truss system is a type of structural steel framing used in high-rise buildings. The system consists of a series of story-high trusses spanning the total width between two rows of exterior columns and arranged in a staggered pattern on adjacent column lines.

What is staggered lapping?

A Lap is required when two pieces of reinforcing bar (rebar) are overlapped to produce a constant line of rebar. The length of the lap fluctuates according to the concrete strength, the rebar grade, size, and spacing. The objective of lap is to transmit load from one bar to another bar as well as retain continuity.

How do you make Joggles?

2:0711:12Making Joggles - YouTubeYouTube

How do you give a column in a lap?

Lapping zone : When we provide lapping in a column, all the rebars should be lapped in zone-B as shown in the drawing. The top and bottom portion of the column, i.e. zone-A ( L/4 length ) should be avoided as there will be a maximum moment in this zone due to lateral forces acting on the column.

What is the flat slab?

What is Flat Slab? The flat slab is a two-way reinforced concrete slab that usually does not have beams and girders, and the loads are transferred directly to the supporting concrete columns. ... Using a drop panel without a column capital in flat slab. Using a column capital without drop panel in flat slab.

Why lapping is provided?

A Lap is required when two pieces of reinforcing bar (rebar) are overlapped to produce a constant line of rebar. The length of the lap fluctuates according to the concrete strength, the rebar grade, size, and spacing. The objective of lap is to transmit load from one bar to another bar as well as retain continuity.

What is lapping in civil engineering?

Lapping can be defined as the overlapping of two bars side by side to upto the design length. Usually, the stock length of steel bars is limited to 12m. This is for easy transportation of steel bars to the construction site. ... Lapping is usually done where minimum bending stress is encountered.

What is joggle length in column?

Joggle length : For the rebars of diameter greater than 12mm, you can consider providing a joggle of 1 in 6. That means if the bar dia. is 20mm then the length of the joggled part of the bar can be calculated as. J = 6 ×Diameter of rebar. = 6 × 20mm = 120mm.

Where do you put lap in slab?

On the other hand, for the bottom reinforcement, it is desirable to provide the lapping at the end sections of the beam. The lapping can also be provided at a distance of L/4 from the face of the column but it must be noted that it is not the mid-point of the beam.

What is Lap zone in column?

As per I.S. 13920 Vertical bars of Columns shall be lapped in regular zone (Mid-height ) only and it should be staggered i.e. not more than 50% of bar can be lapped at one section. In addition to that minimum clear vertical distance between lapped bars shall be 0.25 times lap length.

What are the advantage of flat slab?

Advantages Of Flat Slabs:It reduces the overall height of the structure.Flat slabs are capable to carry concentrated loads.Requires less formwork.As reinforcement detailing of flat slabs is simple it is easy to place.Better quality control.More items...

Objects that Start with J Have you ever thought about how many objects names start with j? Well, if you have a hard time trying to think of the name of the objects with the letter j, here are some examples for you.

Jaconet: a lightweight cotton cloth with a smooth and slightly stiff finish; used for clothing and bandages. Jammies: usually plural loose-fitting nightclothes wore for What is joggle construction?

What is joggle construction?

or lounging; have a jacket top and trousers. Jellaba: a loose cloak with a hood; worn in the Middle East and northern Africa.

What is joggle construction?

Jerkin: a tight sleeveless and collarless jacket often made of leather worn by men in former times. Jeans: used in the plural close-fitting trousers of heavy denim for manual work or casual wear.

Ça, çà ou sa ?

I wear them almost every day. Electronic objects that start with J Jackhammer: a hammer driven by compressed air. Jammer: a transmitter used to broadcast electronic jamming.

What is joggle construction?

T members pulled portable jammers into their base. Juicer: a squeezer with a conical ridged center that is used for squeezing juice from citrus fruit.

Plastic objects that start with J Jorum: a large drinking bowl.

Objects that Start with J

Juicer: a squeezer with a conical ridged center that is used for squeezing juice from citrus fruit. Joystic: -a manual control consisting of a vertical handle that can move freely in two directions; used as an input device to computers or devices controlled by computers.

A lever used by a pilot to control the ailerons and elevators of an airplane.

Contact us

Find us at the office

Canzona- Dimeco street no. 37, 78300 Cayenne, French Guiana

Give us a ring

Ronzell Dupere
+94 603 665 727
Mon - Fri, 9:00-20:00

Write us