Question: What does HS mean in floor plan?

HS = Household Shelter. This refers to the room with reinforced walls, floor, ceiling and door; it is designed to offer protection during an emergency.

What is HS floor plan?

HS: Household/bomb shelter.

What is PL in floor plan?

P.L.: Property Line (or Parts List)

How do I get a floor plan in Singapore?

If you require building plans or floor plans of the units, you can obtain them from the Building and Construction Authority. Visit their website at

How can I get a floor plan of my house?

How to Get Floor Plans of an Existing HouseTalk to the contractor that built your house, if possible. ... Locate the archives of the municipality or county where your house is located. ... Locate the fire insurance maps for the community. ... Visit your local building inspectors office. ... Browse through historical plan books.More items...

How do I find the floor plans for my house?

How can I get a floor plan of my house?Contact your local records office or local city council. ... Reach out to the previous owner. ... Talk to the real estate agent. ... Contact the original architect or builder.Sep 25, 2018

What does F stand for on a floor plan?

House plan abbreviationsABBREVIATIONMEANINGFLFloor level (note: the floor level is provided as a figure relative to a datum, or universal reference point)FWFloor wasteGMGas meterGPOGeneral purpose outlet (i.e. power point)87 more rows

What does PL mean on a drawing?

parts list Also called a list of materials (LM or L/M). Overlaps a lot in concept with a parts list (PL or P/L).

How do I find the original floor plans for my house?

Visit the county clerks office in the county where your home resides. This may be called the county recorder or land registrar in some municipalities. Once there, request copies of the blueprints on file for the property.

Can I get floor plans of my house?

Contact your local permit agency or records office. Often these agencies store copies of building plans for decades after the structure has been built. Ask what information you need to supply in order to obtain copies of existing blueprints. Provide the required forms and information, and pick up a copy of your plans.

How do you create a good floor plan?

There are a few basic steps to creating a floor plan:Choose an area. Determine the area to be drawn. ... Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate. ... Draw walls. ... Add architectural features. ... Add furniture.

How do I find building plans for my house?

How can I get a floor plan of my house?Contact your local records office or local city council. ... Reach out to the previous owner. ... Talk to the real estate agent. ... Contact the original architect or builder.Sep 25, 2018

What does HP mean on floor plan?

window sill Hp is the height of the window sill, i.e. the distance from the finished floor to the edge of the wall opening under the window sill.

What is the full meaning of PL?

In addresses and on maps and signs, Pl is often used as a written abbreviation for Place. ... ... In grammar, pl is often used as a written abbreviation for plural. 3. Pl. is sometimes used as a written abbreviation for please.

What are the 7 categories of technical drawing?

Sets of technical drawings In architecture, these include civil drawings, architectural drawings, structural drawings, mechanical systems drawings, electrical drawings, and plumbing drawings.

Are older homes built better?

Old homes have better-quality construction Even the walls are likely different. In an older home theyre probably built with plaster and lathe, making them structurally stronger than the drywall construction of modern homes. These older materials also provide a better sound barrier and insulation.

Do blueprints show plumbing?

Do the plans/blueprints include plumbing and electrical? A: The rough plumbing is included on the plans showing the kitchen and bath fixture symbols and their locations. However, the location of where the pipes come into the house is site specific and not included on the plans.

Do I need an architect to draw plans?

Your local building authorities require one. In most communities, for most remodels, an architect isnt required. But in others—specifically some urban areas—you may need an architect or engineer to sign off on your plans.

How much does an architect cost to draw plans?

Architects cost $2,000 to $20,000 to draw basic plans or $15,000 to $80,000+ for full house design and services. Average architect fees are 8% to 15% of construction costs to draw house plans or 10% to 20% for remodels. Architects charge hourly rates of $100 to $250 or $2 to $15 per square foot.

Can I draw up my own house plans?

It doesnt take much in the way of resources to draw up your own house plans -- just access to the Internet, a computer and a free architectural software program. If you prefer the old-school method, youll need a drafting table, drafting tools and large sheets of 24-by-36-inch paper to draft the plans by hand.

This tension makes the concrete slab and foundation much stronger than concrete without reinforcement and helps reduce cracking. Older homes with post tension slabs may have a plastic or paper sign fastened to the wall.

What does HS mean in floor plan?

These are often placed next to a door that goes from the garage into the house. There may be times when there are no visible What does HS mean in floor plan? on the wall and no stamped sign on the concrete floor. These circles are usually about 2 to 4 feet apart. They indicate the end of the post tension cables.

What Can I Expect Genie+ Availability to Look Like? Part Two

Sometimes these circles are not visible because of landscaping or because the patching of the cone-shaped voids blends in. Another source of information may be the builder or local building department. They may be able to look at the building plans and tell you if the home has a post tension slab as well as the thickness and location of the cables.

Why do builders use post tension slabs? The two most common reasons for a home builder or contractor to use a post tension slab relate to cost and the type of soils in the area.

What does HS mean in floor plan?

The cost of using a post tension slab system is more economical when the soil conditions are poor and would require additional measures to reinforce the area below the slab to be poured. Areas where soils are expansive in nature or have poor load bearing capacity use post tension slabs more than other areas. The reason for this is that a post tension slab will spread the load of the home over a wider area.

In a standard non post tension slab home the weight of the structure is carried on the foundation and piers. Whereas, on the post tension slab, the weight is partially carried by the slab as well. This results in smaller and less expensive footings being required. Other benefits are that fewer control joints may be required to help control shrinkage cracks. Less concrete or thinner slabs may also be possible for certain expansive soils. When cutting or drilling into the concrete slab a post tension steel cable may get cut or damaged.

What does HS mean in floor plan?

This may weaken the slab structurally or the cable which is under tremendous pressure may occasionally rip right out of the slab and injure someone near it.

Therefore, the builder puts up the do not cut or core warning signs for safety to the homeowner and potential contractors working on the building later on. Seldom does a homeowner cut or drill into their slab, but when remodeling or especially while fixing sewer problems, there may be a need to cut or drill the slab. Take a minute and review the list to see if you have any warning signs of potential issues.

Contact us

Find us at the office

Canzona- Dimeco street no. 37, 78300 Cayenne, French Guiana

Give us a ring

Ronzell Dupere
+94 603 665 727
Mon - Fri, 9:00-20:00

Write us